Date : 98-03-13 [10:52] RELEASE NOTES PER P.D CALL NUMBER Page : 1

Ts 100 (Operational) Company : 100

------------------------------------------------------------------------------------------------------------------------------------

10230434

Call Description :

Problem: Variant disappears

On field product variant, use Ctrl Z, and zoom to session Display

Product Variants. Leave this session with E, but without selecting

a product variant. When back in session Maintain Order Sales Lines

the product field variant blanked out and "This is not a variant of"

message appears.

Solution Description :

After zooming to session Display Product Variants and leaving without

selecting a variant, the product variant before zooming is displayed.

If the message "Did you change the variant" appears and you choose

"No" then the original product variant before zooming is displayed.

The same changes have been made for Sales Quotations.

+--------------------------------------------------------------------------------------------------------------------------

|-------------------+----------------------+------------------------+-------------------------------------+----------------

| tdsls1102s000 | Program Source | sls1102 | | B40 c1

------------------------------------------------------------------------------------------------------------------------------------

10230819

Call Description :

When changing a parameter in session 'Maintain Purchase Parameters

(tdpur4100m000)' and trying to write the record, a message appears.

Solution Description :

The problem with the "Validating input" message hanging even though

the record was saved has been fixed. Afterwards the same changes have

been made to the sales-side.

+--------------------------------------------------------------------------------------------------------------------------

|-------------------+----------------------+------------------------+-------------------------------------+----------------

| tdpur4100m000 | Program Source | pur4100 | | B40 c1

| tdsls4100m000 | Program Source | sls4100 | | B40 c1

------------------------------------------------------------------------------------------------------------------------------------

10230830

Call Description :

On a sales order with more than one orderline which contains

alternative items, the items codes are copied to the other line when

you modify a field that isn't on the first form and then make the same

modification for the other line.

Solution Description :

The alternative item codes aren't copied anymore between the sales

order lines when you modify a field that isn't on the first form and

then make a modification on the other line.

+--------------------------------------------------------------------------------------------------------------------------

|-------------------+----------------------+------------------------+-------------------------------------+----------------

------------------------------------------------------------------------------------------------------------------------------------

10242264

Date : 98-03-13 [10:52] RELEASE NOTES PER P.D CALL NUMBER Page : 2

Ts 100 (Operational) Company : 100

------------------------------------------------------------------------------------------------------------------------------------

Call Description :

When printing the detailed report from tdpur4405m000 Print Purchase

Orders by Customer with Print Text on No, the Text of the Order

is printed.

Solution Description :

When the flag "printing text" is set to no, the ordertext will not be

printed anymore.

+--------------------------------------------------------------------------------------------------------------------------

|-------------------+----------------------+------------------------+-------------------------------------+----------------

| tdpur4405m000 | Report | pur440501100 | | B40 c1

| tdpur4407m000 | Report | pur440701000 | | B40 c1

------------------------------------------------------------------------------------------------------------------------------------

10242632

Call Description :

Possible to enter dimensions for items with unit piece.

In the sales order and purchase order lines it is possible to zoom

from the field "Order quantity" to the sub session "Maintain

dimensions" (tdpur4811s000/tdsls4811s000) for items with unit piece.

Solution Description :

Not possible anymore to enter dimensions for items with unit piece.

In the sales order and purchase order lines it is not possible

anymore to zoom from the field "Order Quantity"

(tdsls041.oqua/tdpur041.oqua) to the sub session "Maintain

dimensions" (tdpur4811s000/tdsls4811s000) for items with unit piece.

+--------------------------------------------------------------------------------------------------------------------------

|-------------------+----------------------+------------------------+-------------------------------------+----------------

| tdpur1102s000 | Program Source | pur1102 | | B40 c1

| tdsls1102s000 | Program Source | sls1102 | | B40 c1

------------------------------------------------------------------------------------------------------------------------------------

10243165

Call Description :

In the session Maintain Exceptions by Location, a specific setup is

defined for country / destination postal code. The specifics are

defined for "postal code origin" and "postal address".

In the session Test Tax Structure, the correct tax code defaults in,

but when a sales order is entered the correct tax code does not

default in.

Solution Description :

The program script was modified to prompt the user to recalculate the

tax code when the user is adding a new order line with a delivery

address at the line level. Previously, the script was only prompting

the user if the previous choice was modify.set. The script was

changed to include add.set as well.

+--------------------------------------------------------------------------------------------------------------------------

|-------------------+----------------------+------------------------+-------------------------------------+----------------

| tdsls4102m000 | Program Source | sls4102 | 002 | B40 c1

Date : 98-03-13 [10:52] RELEASE NOTES PER P.D CALL NUMBER Page : 3

Ts 100 (Operational) Company : 100

------------------------------------------------------------------------------------------------------------------------------------

10243189

Call Description :

Sequence number, change code and change type missing when printing

sales orders to be acknowledged.

+--------------------------------------------------------------------------------------------------------------------------

|-------------------+----------------------+------------------------+-------------------------------------+----------------

| tdsls4102s000 | Program Source | sls4102 | | B40 c1

------------------------------------------------------------------------------------------------------------------------------------

10243198

Call Description :

When the delivery address is changed on the sales order header "after

maintain Deliveries" the system prompts you with "do you want to

recalculate the tax code". If this is answered yes, the new tax code

is not updated.

Solution Description :

Moved the check to determine if the order lines can be modified. The

check is now done before the user is prompt to recalculate the tax

code.

The second parameter sent to tdsls4102.maintain.orderline.allowed was

changed from false to true. This was done so that any error messages

that the script may generate will appear on the screen.

+--------------------------------------------------------------------------------------------------------------------------

|-------------------+----------------------+------------------------+-------------------------------------+----------------

| tdsls4101m000 | Program Source | sls4101 | 002 | B40 c1

------------------------------------------------------------------------------------------------------------------------------------

10243225

Call Description :

When one field on form 1 is changed to 'yes' nothing can be changed.

Also when you come back from another form it's not possible to change

any data.

Changing the field from 'yes' to 'no', and then changing another field

to 'yes' should be possible.

Solution Description :

user interface is improved:

when a field is set to 'yes', all other fields cannot be accessed

when the field is set to 'no', all other fields can be accessed again

(until a field is set to 'yes')

When choozing 'modify' (again) all changed data was reset to the form

or user defaults. This has been removed: all changes remain current.

+--------------------------------------------------------------------------------------------------------------------------

|-------------------+----------------------+------------------------+-------------------------------------+----------------

| tdpur0201m000 | Program Source | pur0201 | | B40 c1

| tdsls0201m000 | Program Source | sls0201 | | B40 c1

------------------------------------------------------------------------------------------------------------------------------------

Date : 98-03-13 [10:52] RELEASE NOTES PER P.D CALL NUMBER Page : 4

Ts 100 (Operational) Company : 100

------------------------------------------------------------------------------------------------------------------------------------

10243250

Call Description :

An error was caused by a report missing from the list of reports

linked to a session.

+--------------------------------------------------------------------------------------------------------------------------

|-------------------+----------------------+------------------------+-------------------------------------+----------------

------------------------------------------------------------------------------------------------------------------------------------

10243266

Call Description :

zoom to session tdpur0553s000, display change order sequence numbers,

was missing from the form.

Solution Description :

Zoom from change order sequence number was missing.

+--------------------------------------------------------------------------------------------------------------------------

|-------------------+----------------------+------------------------+-------------------------------------+----------------

------------------------------------------------------------------------------------------------------------------------------------

10243267

Call Description :

Zoom session missing from order field.

Solution Description :

Zoom function missing from order field.

+--------------------------------------------------------------------------------------------------------------------------

|-------------------+----------------------+------------------------+-------------------------------------+----------------

------------------------------------------------------------------------------------------------------------------------------------

10243298

Call Description :

There is a normal contract and a special contract for the

Customer and Item. On entry of Sales Order Lines the special contract,

which comes up, is rejected. After leaving the session Maintain Sales

Order Lines (tdsls4102s000) the system automatically recalculates the

price and discount (dependent on a parameter) and changes the data

from the Sales Order Line according the values from the special

contract, except for the price.

Solution Description :

After recalculation of prices and discounts, the order lines have the

price and discount according the special contract.

+--------------------------------------------------------------------------------------------------------------------------

|-------------------+----------------------+------------------------+-------------------------------------+----------------

| tdpur4810s000 | Program Source | pur4810 | | B40 c1

| tdsls4810s000 | Program Source | sls4810 | | B40 c1

Date : 98-03-13 [10:52] RELEASE NOTES PER P.D CALL NUMBER Page : 5

Ts 100 (Operational) Company : 100

------------------------------------------------------------------------------------------------------------------------------------

10243310

Call Description :

expected inventory is not correctly displayed

Solution Description :

problem solved

+--------------------------------------------------------------------------------------------------------------------------

|-------------------+----------------------+------------------------+-------------------------------------+----------------

| tdinv1550m000 | Program Source | inv1550 | | B40 c1

------------------------------------------------------------------------------------------------------------------------------------

10243313

Call Description :

In tdilc4201m000 Generate Outboud Advice and tdilc4202m000 Release

Outbound the cancellation of the print job wasn't performed correctly.

The problem is caused by ID 10242722

Solution Description :

In tdilc4201m000 Generate Outboud Advice and tdilc4202m000 Release

Outbound the cancellation of the print job is executed correctly.

+--------------------------------------------------------------------------------------------------------------------------

|-------------------+----------------------+------------------------+-------------------------------------+----------------

| tdilc4201m000 | Program Source | ilc4201 | | B40 c1

| tdilc4202m000 | Program Source | ilc4202 | | B40 c1

------------------------------------------------------------------------------------------------------------------------------------

10243314

Call Description :

Customer purchase order number is maintained in the order header but

not printed on the order acknowledgement report.

+--------------------------------------------------------------------------------------------------------------------------

|-------------------+----------------------+------------------------+-------------------------------------+----------------

| tdsls440101000 | Report | sls4401 | 002 | B40 c1

------------------------------------------------------------------------------------------------------------------------------------

10243337

Call Description :

Item: Maintain Priority Simulation Code

What happens: While maintaining the codes, one has to zoom and pick up

one of the table fields. On zoom the table fields are displayed but

when the fields are selected, this session does not pick up the

fields.

Solution Description :

The form was changed to zoom-to the session ttadv4522s000 instaed of

ttadv4529s000 from the field tdsls025.levl.

+--------------------------------------------------------------------------------------------------------------------------

|-------------------+----------------------+------------------------+-------------------------------------+----------------

------------------------------------------------------------------------------------------------------------------------------------

Date : 98-03-13 [10:52] RELEASE NOTES PER P.D CALL NUMBER Page : 6

Ts 100 (Operational) Company : 100

------------------------------------------------------------------------------------------------------------------------------------

10243372

Call Description :

Change code history for order line is displayed twice in 'Diaplay

Sales Order Change Code History' (tdsls5506s000). Actually it's not

the record got displayed twice, it's the way order history works.

When a change is made to the order line, two history lines will be

tive en to the order line history table (tdsls051), the first history

line is the reversing entry to back out the old quantity/amount and

the second history line is to record the new order line data. For

example, the original quantity of the order line is 5, but got

changed to 8 later, the order line history will look like this:

Quantity Price Amount

-------- ----- -------

1. 5 10.00 50.00 (Written when the line frist created)

2. -5 10.00 -50.00 (Written when qty changed from 5 to 8)

3. 8 10.00 80.00 (Written when qty changed from 5 to 8

Without displaying the quantity history record 2 and 3 looks

identical that causes the confusing.

+--------------------------------------------------------------------------------------------------------------------------

|-------------------+----------------------+------------------------+-------------------------------------+----------------

------------------------------------------------------------------------------------------------------------------------------------

10243375

Call Description :

Problem situation:

BOM with containerized items;

for containerized items ATP is used to check availability

running session tdsls1205s000 can leads to fatal error:

reference not found: tdinv001.cmba - tiitm100

Solution Description :

ATP check for containerized items from a BOM are correctly handled

now.

+--------------------------------------------------------------------------------------------------------------------------

|-------------------+----------------------+------------------------+-------------------------------------+----------------

| tdinv0250m000 | Program Source | inv0250 | | B40 c1

| tdsls1102s000 | Program Source | sls1102 | | B40 c1

| tdsls1201s000 | Program Source | sls1201 | | B40 c1

| tdsls1202s000 | Program Source | sls1202 | | B40 c1

| tdsls1205s000 | Function Source | sls1102 | | B40 c1

| tdsls1803s000 | Program Source | sls1803 | | B40 c1

| tdsls1809s000 | Program Source | sls1809 | | B40 c1

| tdsls4102s000 | Program Source | sls4102 | | B40 c1

| tdsls4809s000 | Program Source | sls4809 | | B40 c1

------------------------------------------------------------------------------------------------------------------------------------

10243376

Call Description :

Created a P.O. with order header text in Dutch and sent via EDI to

supplier whose language is English. When the EDI order is received by

Date : 98-03-13 [10:52] RELEASE NOTES PER P.D CALL NUMBER Page : 7

Ts 100 (Operational) Company : 100

------------------------------------------------------------------------------------------------------------------------------------

the supplier, there's no sales order header text displayed on the text

manager even though the 'Text' field is set to 'Yes' on the header.

Solution Description :

+--------------------------------------------------------------------------------------------------------------------------

|-------------------+----------------------+------------------------+-------------------------------------+----------------

------------------------------------------------------------------------------------------------------------------------------------

10243390

Call Description :

When environment variable TEST_RETRY is set to value > 0, the incoming

messages fail with fatal error: 'Retry failed during TEST_RETRY'.

Steps taken:

Set TEST_RETRY = 2.

Attempted to bring in EDI sales order using the Direct Network

Communication (tcedi7205m000) session; it failed as indicated above.

Next, attempted to bring in EDI order acknowledgment; it also failed

as indicated above.

Solution Description :

System gave error message "Transaction is on. Cannot Continue". This

problem was solved by changing the retry points within the program for

received messages and the corresponding messages.

+--------------------------------------------------------------------------------------------------------------------------

|-------------------+----------------------+------------------------+-------------------------------------+----------------

------------------------------------------------------------------------------------------------------------------------------------

10243396

Call Description :

When accepting the default data (from customer del. address or

warehouse) the data is not saved.

Solution Description :

problem solved

+--------------------------------------------------------------------------------------------------------------------------

|-------------------+----------------------+------------------------+-------------------------------------+----------------

| tdpur4103s000 | Program Source | pur4103 | | B40 c1

| tdpur4104s000 | Program Source | pur4104 | | B40 c1

| tdsls4103s000 | Program Source | sls4103 | | B40 c1

| tdsls4104s000 | Program Source | sls4104 | | B40 c1

------------------------------------------------------------------------------------------------------------------------------------